2011 Geneva Preview: Lexus LFA Nurburgring Package

Lexus just releases new photos and details for the Lexus LFA Nurburgring Package ,which will debut at the Geneva auto show next week.

The package celebrates Lexus’ class victories at the 24 Hours of Nürburgring last May. Lexus isn’t actually adding to LFA production; instead, the automaker says that 50 of the 500 cars set to be built will be equipped with the package.

Available in Matte Black, Black, White or Orange, the interior can be had in Black and Red, Black and Pur­ple or all Black. Plus, all Nurburgring editions get added carbon  fiber interior bits, plus carbon racing seats.

Power is also on the up. From the standard 4.8-litre V10 with 560 PS (412 kW / 553 bhp) comes a new power figure of 570 PS (419 kW / 562 bhp) and reduced gearshift times. Performance times are also down; 0 - 62mph flashes by in 3.7 seconds and top speed is 325 km/h (202 mph).

The automated manual six-speed transmission’s shift regime has been recalibrated too, swopping gears in only 15 miliseconds, thereby enabling the LFA Nürburgring package to sprint from 0-100km/h in only 3.7 seconds.




Press Release

LEXUS PRESENTS LFA NÜRBURGRING PACKAGE

• Lexus reveals special performance package for its LFA supercar at the Geneva motor show
• Nürburgring Package offered as an option on a maximum of 50 cars - just 10 per cent of the total LFA production run
• Designed for more track-focused performance through additional aerodynamic elements, lowered suspension and engine revisions
• 10bhp increase in power from V10 engine to 562bhp ensures LFA's 0-62mph acceleration time of 3.7 seconds is maintained
• LFA production underway since December, with one hand-crafted car completed per day
• Use of advanced, automated Carbon Fibre Reinforced Plastic (CFRP) production processes serves as a test bed for future models

To celebrate the LFA's hat-trick of class wins at the Nürburgring 24 Hours race, Lexus has created the Nürburgring Package, an array of aerodynamic features, suspension adjustments and revisions to the 4.8-litre V10 engine that give the supercar a more track-focused profile. Shown in public for the first time at the Geneva motor show, the performance option is available on just 50 of the 500 cars that will be built. These versions will be crafted during 2012, the second full year of LFA production.

To sharpen the car's circuit driving performance even further by increasing downforce at high speed, the Nürburgring Package introduces modifications and additions to several key carbon fibre reinforced plastic (CFRP) components. These include a larger front spoiler, fin-type side spoilers, a canard fin and a fixed rear wing.

To ensure the LFA maintains its 3.7-second acceleration time from nought to 62mph, in spite of the increased drag, the V10 engine has been revised to increase maximum power by 10bhp to 562bhp. Shift times in the six-speed sequential transmission are just 0.15 seconds.

In terms of handling modifications, the package features suspension tuning and a 10mm reduction in the ride height. Exclusive mesh-type wheels are introduced, fitted with dedicated high-grip tyres.

Exterior colour choices are restricted to matte black, black, white or orange, with interiors finished in black and red, black and purple and all-black. Cars delivered in Europe will feature a carbon fibre centre console and door trims, with carbon fibre sports seats finished in Alcantara.

Customers who specify the package will also be offered one-to-one driving tuition from a Nürburgring chief instructor and a year's pass to enjoy their car on the famous Nordschleife circuit.

CFRP parts manufacturing

LFA production began in December with just one hand-crafted car completed per day. A team of 175 people are involved in CFRP parts manufacturing, vehicle assembly and painting.

CFRP is exceptionally strong, rigid and lightweight, and accounts for about 65 per cent of the LFA's body structure weight. This amounts to a saving of about 100kg, compared an equivalent all-aluminium body.

Lexus is producing and assembling the CFRP components in-house, with a view to future development of the technology. It is a time-consuming process, compared to working with steel or aluminium, but the LFA project provides a valuable test bed for new, automated processes which will be used in the manufacture of future Lexus and Toyota models.

Different manufacturing technologies are used according the shape, role and required properties of each component.

• Pre-preg: this is an industry-standard composite sheet material made of carbon fibre, pre-impregnated with epoxy resin. It is used for the LFA's main structural elements, such as the dash, side and cross-members and panels.

• Resin Transfer Moulding (RTM): this is dry sheet fabrication, with epoxy resin injected into the mould. It is mainly employed in the LFA's secondary main frames, such as the crash boxes, roof side rails and vehicle floor.

• Carbon fibre - Sheet Moulding Compound (C-SMC): this is used for fabricating the upper body components and frames that have complex geometries.

Adhesive bonding

The LFA assembly line moves through five consecutive processes, each of which has been digitally validated. For the first four - sub-assembly, underbody, small aluminium parts and main body - adhesive bonding is used. Final assembly of the aluminium parts is by mechanical fastening.

This is the first time Lexus has used adhesive bonding for main body assembly, a process that has required new quality control measures to be implemented to ensure each of the five stages involved in the bonding meets the required criteria.

Trapped Accelerator Pedals Come to Haunt Toyota and Lexus Again, 2.12 Million Vehicles Recalled in the USA

The Toyota Group may be off the hook over suspicions of unwanted sudden acceleration caused by software-driven throttles after the findings of the NHTSA-NASA study, but the Japanese automaker is once again making headlines over trapped accelerator pedals. Today, Toyota announced that it will conduct a voluntary safety recall of approximately 2.12 million vehicles in the United States to address accelerator pedals that could become entrapped in floor mats or jammed in carpeting.

More specifically, Toyota is recalling approximately 20,000 Lexus GS 300 and GS 350 All-Wheel Drive vehicles from the 2006-2007 model years to modify the shape of the plastic pad embedded in the driver’s side floor carpet. According to the company, if the floor carpet is not properly replaced in the correct position after a service operation, it is possible that the plastic pad embedded into the floor carpet may jam against the accelerator pedal and keep it from returning to the idle position.

Lexus said owners of the involved GS 300 and GS 350 AWD vehicles will receive a notification by mail in early March 2011.

The Japanese automaker is also recalling approximately 372,000 Lexus RX 330, RX 350, and RX 400h vehicles from the 2004 through 2006 and early 2007, plus another 397,000 Toyota Highlander and Highlander HV SUVs from the 2004-2006MY to replace the driver’s side floor carpet cover and its two retention clips. Toyota said if the cover is not installed correctly, it may lean toward the accelerator pedal and jam it in a partially depressed position.

The company stated that owners of the involved RX and Highlander vehicles will receive an interim notification by first class mail beginning in the near future, explaining how to inspect for this condition or that they may contact their local dealer to perform the inspection. "Owners will receive a second notification once the replacement covers are available," the company said.

In a separate action, Toyota added another 1.38 million vehicles to the company's November 2009 recall to fix floor mats that could shift out of position. The models added include:

• Approximately 603,000 2003 through 2009 4Runner
• Approximately 17,000 2008 through 2011 Lexus LX 570; and
• Approximately 761,000 2006 through 2010 RAV4

"Owners of the involved 4Runner, LX 570, and RAV4 vehicles will receive an interim notification by first class mail beginning in the near future, informing them of the condition. Owners will receive a second notification once the recall preparations are complete," said Toyota in a statement.

_______________________________GALLERY_______________________________

BMW Bankruptcy Bust Up in the Bush: The Price of Luxury Car Loans Down Under

AU$18 million or about US$18.1 million at the current exchange rates. That’s how many Australian dollars some 226 plus Aussies owe BMW’s unimaginatively named financial arm "BMW Finance". The Bavarian automotive giant is now perusing bankruptcy proceedings against these persons in Australia’s Federal Magistrates’ Court in an effort to recoup the debt from hundreds of unpaid car loans.

It’s all rather depressing, really, especially in the aftermath of the Global Financial Crisis. Take one man who bought an AU$80,000 Lexus on credit shortly before he lost his AU$110,000 job. Or the woman who signed her name on a car loan for her and her husband, only to have him leave her and get stuck with the debt. "They repossessed the car, but they still want [AU]$25,000. I don't know what to do,” said the 34 year-old.

That the woman earns just AU$36,000 a year is of no concern to BMW Finance. Peter Malone, a bankruptcy expert at CRS Warner Kuegel told the Sunday Herald Sun newspaper that creditors could, through a bankruptcy trustee, seize many of a debtor’s assets including their home, cash and shares.

Even if the car is repossessed or sold on, debtors still owe on the shortfall which can sometimes be big money. In Australia, one can be made bankrupt over as little as AU$5,000. Most of the claims the Herald Sun inspected fell into the AU$30,000 plus category, with one debtor owing a whopping AU$190,000.

It just goes to show that that old saying still stands up today, “They that dance must pay the fiddler.” Though in retrospect, why anyone would want to dance to a AU$190,000 tune is beyond my comprehension...

By Tristan Hankins

Source: Herald Sun

Lexus Releases New Photos of Geneva-Bound LFA Nürburgring Edition

After providing us with an initial batch of three photos of its LFA Nürburgring Edition, Lexus today unleashed more than a dozen new pictures of the more track-orientated version of its supercar. Built to celebrate the LFA's hat-trick of class wins at the Nürburgring 24 Hours race, the limited edition will be shown in public for the first time at the Geneva Motor Show on March 1.

The Nürburgring performance package is available on only 50 of the 500 LFA cars that will be built, with all of these versions to be crafted during 2012, the second full year of LFA production.

The LFA Nürburgring Edition sports a more powerful version of the front-mounted 4.8-liter V10 engine producing 562bhp (+10bhp), while changes to the six-speed sequential transmission drop shift times from 0.20 to 0.15 seconds.

Despite the power boost and faster gearbox, due to the increased drag from the aerodynamic enhancements that were made to augment downforce at high speed and include a larger front spoiler, fin-type side spoilers, a canard fin and a fixed rear wing, the Nürburgring Edition maintains the standard LFA's 3.7 second 0-100km/h (62 mph) sprint time and 325 km/h (202 mph) top speed.

Other revisions include a more hardcore suspension tuning and a 10mm reduction in the ride height plus exclusive mesh-type wheels fitted with dedicated high-grip tires.

Exterior color options for the limited edition model are restricted to matte black, black, white or orange, with interiors finished in black and red, black and purple and all-black. According to Lexus, cars delivered in Europe will feature a carbon fibre centre console and door trims, with carbon fibre sports seats finished in Alcantara.

_______________________________GALLERY_______________________________