Dutch Man Builds Alfa Romeo GTV Bi-Motore with Two V6 Engines and 487HP [with Videos]

“What do you do when the power of an engine is no longer sufficient?” asks Stephan Lenior, the man behind Squadra Tuning, on his company’s website. While the solution for the majority would have been a heavily modified or perhaps a completely different engine altogether, for the owner of the Alfa Romeo tuning company based in Holland, the answer to that question was far more radical and complex.

To make a very long story short, Stephan’s solution to u the performance of his Alfa Romeo GTV V6 involved the fitment of a second six-cylinder engine at the back. Easier said than done of course, with the project turning out to be a rather complicated and time-consuming process.

Stephan documented the entire build on his company’s website and if our Google’s translation is correct (any help from our Dutch speaking readers would be appreciated, especially on the matter of the transmission), Stephan took a 3.2-liter V6 along with the sub frame and suspension bits from an Alfa Romeo 166 and placed them in the rear section of the Italian coupe. Together with the GTV’s front-mounted 3.0-liter V6, the two engines produce a combined output of 487-horsepower.

We are not entirely sure on this one, but it appears that the GTV is equipped with two 5-speed gearboxes, both sourced from a Lancia Kappa 2.4 JTD, and controlled by a single gear shifter.

The car also features a set of front disc brakes from the 166 mounted at the back, while the builder tried to compensate for the increased weight of the second powertrain by replacing certain components such as the powered seats and standard alloys with lighter equivalents, and removing unnecessary amenities like the air-condition and sound insulation.

Surprisingly, Stephan kept the GTV’s exterior look stock with the only telling feature about the build being the air vents on the boot.

The owner claims that the Alfa Romeo GTV Bi-Motore can accelerate from zero to 100km/h (62mph) in about 4.5 seconds and to 200km/h (124mph) in approximately 14 seconds, while theoretically topping out at around 290km/h (180mph), though for obvious reasons, Stephan has not yet tried to push the car -and his luck- to the limit.

Source: Squada-Tuning , Videos: Youtube

Specifications [Translated from Dutch]:

Engines: 1 x 3.0 24v, 3.2 24v x 1 Total: 6138 cc, 487 hp @ 6200 rpm, 577 Nm @ 5000 RPM
Gearboxes: 2 x 5-gears Lancia Kappa 2.4 JTD.
Front suspension: Koni yellow with Novitec GTV springs. Torsion rod GTV
Suspension rear: Alfa 166 with Koni yellow on height and size. Torsion bar 166 3.0
ABS brakes with original working
Brakes front: 330 mm original GTA Upgrade
Rear Brakes 278 mm original Alfa 166 2.4 JTD equipped with adjustable maximum brake pressure
Hydraulic handbrake.
Wheels and tires: OZ Ultraleggera with Pirelli PZero Nero 225/45 ZR 17 94W.
Fuel tank 90 liters, 2 fuel pumps
Exhaust system: exhaust system with 2 times EPS catalyst, oxygen sensor 4 times.
Curb mass: 1680 kg (with half full fuel tank)
Performance: top speed probably between 290 and 300 km / h in fifth gear at 6500 RPM 292 km / hour.
Acceleration 0-100 + / - 4.5 sec. 0-200: + / - 14.0 sec

VIDEOS

_______________________________________________________________________

PHOTO GALLERY

VIDEO: A MINI Cooper S Powered by a Helicopter Jet Engine

Rolls-Royce and MINI may have the same owner, but the two iconic British brands have never been intended to cross paths. That was until a Texas-based firm called BMP Design decided to squeeze a Rolls-Royce Allison 250-C20B jet engine sourced from a helicopter in the back of a MINI Cooper S. Yes, that's right, just behind the front seats.

The consequences of this action are easy to imagine: the 420-horsepower, 400 lb-ft of torque RR engine drives the rear wheels, turning the MINI into a 4WD monster. Managing to drive the car is a major achievement, since the driver needs to balance the conventional controls with the separate levers that command the jet engine.

As you are about to see, the speed and the acceleration of this little rocket are mind-blowing. As is the noise coming from the turbine engine. Watch the videos after the break.

By Dan Mihalascu

Source: Jalopnik

_______________________________VIDEOS_______________________________

This 1980 Toyota Corolla TE71 Packs a Big-Block 454 / 7.4-liter Chevy V8

Let us introduce you to our find of the day; a 1980 Toyota Corolla TE71 Coupe retrofitted with a big brawny classic American V8 powerplant. This wolf in sheep's clothing was once powered by a small four-cylinder engine but now comes with a 454 cubic inch (equal to 7.4-liters) big block Chevrolet V8 powerhouse that drives the wheels through GM's Turbo-Hydramatic 400 transmission.

According to the eBay seller, "with 13 inch tires it only goes about 65 [we'll assume he's talking about mph here] at 4000 rpms, but it gets there in about 4 seconds" and while driveable, the car needs some TLC to be road-worthy. The current bid on eBay is $3,251 but the reserve has not been met yet.

Source: eBay via Autoholics

_______________________________GALLERY_______________________________

VIDEO: Kawasaki ZX10 takes on Mazda RX-7 with Corvette V8 in Drift Challenge

Now here's something you don't see every day. Sent in by Carscoop reader Łukasz Ż, this enjoyable time-waster of the day pits a motorcycle against a rear-wheel drive sports car in an out of the ordinary drift challenge. In one corner we have Nick "Apex" Brocha of Icon Motorsports piloting a 2005 Kawasaki ZX10 with 175HP and an extended swingarm. In the other corner is professional racecar driver Jim Guthrie in a 1993 Mazda RX-7 powered by a 375HP Corvette V8 engine. The result? Follow the jump to find out.

_______________________________VIDEO_______________________________

eBay Sleeper: 1979 Chevrolet Malibu with Pontiac GTO 5.7-liter LS1 V8

Now that Pontiac is officially gone, one way of keeping the heritage alive is to salvage whatever parts you can find. We don’t know if that’s what the owner of this 1979 Chevrolet Malibu thought, but, nevertheless, he did swap the original engine with a modern 5.7-liter LS1 V8, sourced from a wrecked GTO, while keeping the styling of the car pretty much stock.

Engine aside, the old-school Malibu has been fitted with a 9-inch Ford locking differential, a Tremec T-56 six-speed manual, various Corvette drive accessories and Edelbrock rear shock absorbers.

The seller claims it's in good condition without any rust, and that it is accompanied by the original engine and transmission, purchase order and receipts for every new part installed.

As far as we can tell from the photographs, the interior is also in good shape, fitted with hard-to-find factory original bucket seats and floor console (according to the owner).

The mileage is listed at 47,656, but it could be what the new engine has clocked up and not the car. In any case, the Malibu seems to have aged well and the bevy of new parts installed should put any reliability-related worries to rest. It should be pretty fast, too.

*The car was listed for sale on eBay for $11,000, but the reserve was not met.

By Csaba Daradics

Source: eBay , Via: Ridelust

_______________________________GALLERY_______________________________